• µLILLY-MiniBase10

    µLILLY-MiniBase10

    • RISC 32bit Processor
      ARM® 1136 JF-S
    • MX35x / 532MHz
    • Coprocessor VFP
    • DRAM up to 256 MB DDR2
    • FLASH 32 / 64 MB
    • SSD: µSD Card Slot internal
    • 1x USB 2.0
    • 1x USB HS On-The-Go
    • 1x Ethernet 10/100 Mbps
    • 2x CAN-BUS
    • 1x RS232 or 1x RS485

    Optional:

    • Power over Ethernet
    • GSM
    • W-LAN
  • LILLY-MiniBase10L-top
    LILLY-MiniBase10L-back

    LILLY-MiniBase10L

    • Baseboard for LILLY SoM Scalable Processor
    • Coprocessor VFP / DSP
    • DRAM up to 256 MB
    • FLASH 128 MB
    • SSD: µSD Card Slot Internal
    • 1x USB 2.0
    • 1x USB HS On-The-Go
    • 1x Ethernet 10/100 Mbps
    • 1x CAN-BUS
    • 1x RS232 or 1x RS485

    Optional:

    • Boxed
    • 2,4 Inch Touch TFT Display
    • I/O 4×4
    • (Dig. Monitor Interface)
    • Power over Ethernet
    • GSM / GPS
    • W-LAN
  • LILLY-MiniBase21

    • LILLY-bus system
    • 240 Pin Connector
    • 3x Serial: 2x RS232 / RS485
    • 1x TTL
    • I ² C-BUS
    • 3x USB
    • Ethernet 10/100 Mbps
    • 8×8 Key matrix
      (16 I / O) IF
    • Display Interface,
      TTL or LVDS-IF
    • Resistive touch-IF

    Optional: CAN-BUS controller

  • LILLY-MiniBase22

    • LILLY system bus
      Connector 240 Pin
    • 3 x serial: 2 x RS232 / RS485
    • I²C- BUS
    • 3x USB
    • Ethernet 0,1 up to 1 Gbps
    • 8×8 Key Matrix (16 I/O) IF
    • Display-Interface in
      TTL or LVDS IF
    • Resistive Touch IF
    • CAN-BUS IF
  • µLILLY-MiniBase30

    • µLILLY system bus
      Connector 200 Pin
    • 3x serial COM1 RS232,
      2x TTL
    • I²C- BUS
    • 3x USB
    • Ethernet 10/100 Mbps
    • 8×8 Key Matrix (16 I/O) IF
    • Display-Interface in
      TTL or LVDS IF
    • Resistive Touch IF
    • CAN-BUS IF
  • pLILLY-MiniBase40

    • pLILLY system bus
      Connector 100 Pin
    • 3x serial COM1 RS232,
      2x TTL
    • I²C- BUS
    • 3x USB
    • 2x CAN-BUS IF
    • 2x Ethernet 10/100 Mbps
    • 4x dig. I/O IF
    • Display-Interface in
      TTL or LVDS IF
    • Resistive Touch IF

     

  • LILLY-BD-056

    LILLY-BD-056

    • Baseboard for various LILLY SoM
    • LILLY-9 (ARM9 / 200MHz)
    • LILLY-11 (ARM11 / 532MHZ
    • LILLY System bus 240 PINS
    • AUX – Module-Interface
    • SD-Card Slot
    • 3x UART / I²C-BUS IF
    • 2x USB 2.0
    • Ethernet 10/100 Mbps
    • Audio IF
    • LCD TFT IF
    • Touch Screen IF
  • LILLY-BD064-side
    LILLY-BD064

    LILLY-BD-064

    • For LILLY-SoM Family
    • Display TTL/ LVDS IF
    • LED Backlight Inverter
    • Resistiv Touch IF
    • Systembus 240Pin LILLY IF
    • Ethernet
    • USB
    • RS232
    • CAN BUS
    • I²C-BUS
    • 8 Dig. IN galvanic isolated
    • Dig. OUT galvanic isolated
  • LILLY-BD88C

    LILLY-BD-88C

    • Scalable CPU LILLY SoM
    • Display TTL / LVDS IF
    • LED Backlight Inverter
    • Resistive / Capazitive Touch IF
    • 1x µSD-Card Slot
    • 1x Ethernet
    • 1x CAN Bus
    • 3x Seriell RS232 / RS 485
    • 3x USB
    • I²C-BUS
    • 8 Dig. IN electrically isolated
    • 8 Dig. OUT electrically isolated
    • Power ON Management System
    • V ex: 24V DC IN
    • Power Supply 9-36 V DC
  • LILLY-BD-090

    • Baseboard for various LILLY SoM
    • LILLY-9 (ARM9 / 200MHz)
    • LILLY-11 (ARM11/532MHz)
    • LILLY-System bus 240Pin
    • 3x UART
    • 2x USB 2.0
    • 2x Ethernet 10/100 Mbps
    • 2x CAN-BUS Controller
    • 5×5 dig. IN/OUT TTL
    • 3x dig. OUT galv. isolated
    • 3x dig. IN galv. isolated
    • 3x 16bit ADC
    • Camera F-BAS IN
    • LCD TFT IF
    • Touch Screen IF
  • LILLY-BD1010

    LILLY-BD-1010

    • LILLY-Systembus
      connector 240 Pin
    • 2x CAN-Bus Controller
    • 3x Serial: 2x RS232 / RS485
    • 1x TTL
    • I²C- BUS
    • 2x USB , 1x USBOtG
    • Ethernet 10/100 Mbps
    • 4/4 dig I/O IF
    • Display-Interface in TTL- or LVDS- interface
    • Resistive Touch- interface

    Optional:

    • CAN-BUS controller
    • Power over Ethernet