HS-P-I

0,00 €

INCOant Family :

DIN – Rail – Processor-System
CPU NXP Cortex™ -A53 1GHz
CPU Allwinner A20 Dual Core 2x 1GHz
µSD Card Slot Internal / External
1x Ethernet
Power Supply: 9V bis 32V (12V / 24V)

Interfaces optional:

USB 2.0
CAN-BUS
RS232 / RS485 (Modbus)
dig. In/Out

Optional:

Opto-galvanic isolated or
SDI-12 Sensor Bus
M-BUS
WLAN or GSM / GPRS

General Request

Clear

SKU: N/A Categories: DIN RAIL PC, INDUSTRY PC

Description
Additional information

The DIN rail processor system is 17.5 mm wide and equipped with an ARM 1126 i.MX35 / 532MHz or Cortex ™ -A7 A20 DualCore 2x 1GHz processor. The system has a high degree of integration: in addition to the main memory, it contains a flash, an internal and an external slot for expanding the µSD card. Optional: extension with eMMC Flash. The HS-P-I system is equipped with an Ethernet interface and optionally with WLAN or GSM. The following interfaces can optionally be wired via the 4 additional ports: 1x RS232 / 1x CAN / 1x M-Bus / 1x SDI-12 / 1x RS485 (Modbus) or RS232 / 4x dig.I / O 2/2. Double LED gr. / Red (from GPout), 1x button (from GP in). The power supply is 24 V (9 V to 32 V).
The HS-P-II is equipped with two separate Ethernet controllers.

The following table illustrates the equipment variants:

Modell		INCOant Family: HS-P I
Specification		HS-P-I- Y ST xx ZX
without galvanic Isolation ST		00	01	02	03	04	05	06	07
with galvanic Isolation ST		10	11	12	13	14	15
CPU	2) A20 /2x 1GHz	+	+	+	+	+	+	+	+
CPU	3) LS1012A 1GHz		+			+		+	+
Ethernet	Eth. (1)	+	+	+	+	+	+	+	+
Ethernet	Eth. (2)
CAN-Bus	CAN (1) *)	+		+	+		+
M-BUS	RS485								+
COM1	RS232 **)	+	+	+	+	+	+	+	+
COM2	RS232	+	+
COM2	SDI- 12 ***)							+
COM3	RS485		+	+		+		+	+
GP I/O	1/1 (1)	+	+	+	+	+	+	+	+
GP I/O	1/1 (2)					+	+
Optional 1	B) HS- BUS System	+	+	+	+	+	+	+	+
Optional 2	W) WLAN	+	+	+	+	+	+	+	+
(max.1 choosable)	G) GSM/LTE	+	+	+	+	+	+	+	+

) Only pLILLY-A20 with CAN / ) Without galvanic isolation / **) with SDI- 12 Sensor Bus
The DIN-Rail Processor System is 17.5 mm thin and equipped with an ARM 1126 i.MX35 /532MHz processor. Because of the high integration of periphery the system has a 128MB, a NAND Flash and an internal or external Slot for µSD- Card extension (Optionaly also available as an iNAND /eMMC Flash). The system HS-P-I is outfitted with 1 Ethernet IF and can optionally be equipped with WiFi. The HS-P-II has two separate Ethernet-Controller. The 4 more optional interfaces can be wired: 2x CAN / M- BUS / RS232 / RS485 / and / or 4x dig. I/O. The power supply is 24V (9V bis 32V).

More options on request

CPU	Allwinner A20 Cortex™-A7 Dual Core / 2x 1GHz, NXP LS1012A, 0,8 -1 GHz, Cortex™-A53
Memory	DRAM 2GB
Flash / Slot	8 up to 64GB eMMC, µSD Card Slot 1x External and 1x Internal
network	1x Ethernet mit 10/100 Mbps
Periphery	Real-Time Clock, Watchdog-Timer, Buffer battery, voltage monitoring
Interfaces	1x USB 2.0, 1x button (by GP in), Double – LED green (Power ON) red (by GPout)
Interface optional	1/2x RS232 (Rx,Tx), 1x M – Bus, CAN-Bus, RS485, SDI12, up to 2x dig. IN and 2x dig. OUT
optional	Galvanic isolation for 1x RS 232, Galvanic isolation for 1x RS 485, Galvanic isolation for: CAN-BUS, GSM / GPRS, WLAN
power supply	9V to 32V (12V – 24V)
Operating System	Linux, Windows®CE

HS-P-I

Related products