The DIN rail processor system is 17.5 mm wide and equipped with an ARM 1126 i.MX35 / 532MHz or Cortex ™ -A7 A20 DualCore 2x 1GHz processor. The system has a high degree of integration: in addition to the main memory, it contains a flash, an internal and an external slot for expanding the µSD card. Optional: extension with eMMC Flash. The HS-P-I system is equipped with an Ethernet interface and optionally with WLAN or GSM. The following interfaces can optionally be wired via the 4 additional ports: 1x RS232 / 1x CAN / 1x M-Bus / 1x SDI-12 / 1x RS485 (Modbus) or RS232 / 4x dig.I / O 2/2. Double LED gr. / Red (from GPout), 1x button (from GP in). The power supply is 24 V (9 V to 32 V).
The HS-P-II is equipped with two separate Ethernet controllers.
The following table illustrates the equipment variants:
Modell | INCOant Family: HS-P I | ||||||||
---|---|---|---|---|---|---|---|---|---|
Specification | HS-P-I- Y ST xx ZX | ||||||||
without galvanic Isolation ST | 00 | 01 | 02 | 03 | 04 | 05 | 06 | 07 | |
with galvanic Isolation ST | 10 | 11 | 12 | 13 | 14 | 15 | |||
CPU | 2) A20 /2x 1GHz | + | + | + | + | + | + | + | + |
3) LS1012A 1GHz | + | + | + | + | |||||
Ethernet | Eth. (1) | + | + | + | + | + | + | + | + |
Eth. (2) | |||||||||
CAN-Bus | CAN (1) *) | + | + | + | + | ||||
M-BUS | RS485 | + | |||||||
COM1 | RS232 **) | + | + | + | + | + | + | + | + |
COM2 | RS232 | + | + | ||||||
COM2 | SDI- 12 ***) | + | |||||||
COM3 | RS485 | + | + | + | + | + | |||
GP I/O | 1/1 (1) | + | + | + | + | + | + | + | + |
1/1 (2) | + | + | |||||||
Optional 1 | B) HS- BUS System | + | + | + | + | + | + | + | + |
Optional 2 | W) WLAN | + | + | + | + | + | + | + | + |
(max.1 choosable) | G) GSM/LTE | + | + | + | + | + | + | + | + |
*) Only pLILLY-A20 with CAN / **) Without galvanic isolation / ***) with SDI- 12 Sensor Bus | |||||||||
The DIN-Rail Processor System is 17.5 mm thin and equipped with an ARM 1126 i.MX35 /532MHz processor. Because of the high integration of periphery the system has a 128MB, a NAND Flash and an internal or external Slot for µSD- Card extension (Optionaly also available as an iNAND /eMMC Flash). The system HS-P-I is outfitted with 1 Ethernet IF and can optionally be equipped with WiFi. The HS-P-II has two separate Ethernet-Controller. The 4 more optional interfaces can be wired: 2x CAN / M- BUS / RS232 / RS485 / and / or 4x dig. I/O. The power supply is 24V (9V bis 32V). |
More options on request